STRECKKOD HP
€329.00
Tax included
Resonator bass traps measuring 595 x 595mm (134mm thickness). Boxes containing 2 units, manufactured with a wood structure, an absorbent core and resonating membrane. High acoustic performance for control and mastering rooms.
FREE SHIPPING FOR SPAIN
On orders from € 600 for the Peninsula and the Balearic Islands. For rest of Europe please contact
PERMANENT STOCK
More than 1000 m2 for products storage. Custom manufacture available.
SECURE PAYMENT
Pay with Mastercard / Visa. BBK
What are they?
STRECKKOD HP is a resonator bass trap, designed to complement the low frequency absorption of the STRECKKOD product family and STRECKKOD BT traps, providing acoustic solutions for control rooms, mastering rooms, home studios, etc.
It is part of the Streckkod product range:
| STRECKKOD HP | STRECKKOD BT | STRECKKOD |
|---|---|---|
63 Hz a 125 Hz |
125 Hz a 500 Hz |
400 Hz a 5000 Hz  |
STRECKKOD HP is a resonance membrane-based bass trap, designed to be installed in the corner of the room. It has a rigid exterior structure made from wood and a front end based on our Streckkod panel with MLS grooves. The inside of the trap combines an absorbent, high-density acoustic foam core, two resonance chambers and a pressure membrane tuned to 100Hz, forming a resonator set that acts with the pressure of the incidental sound waves.
The front wooden panel includes a series of MLS diffusion grooves, which allow two functions to be obtained: they provide high-frequency absorption to control reflections from the corners without dampening the sound, while it simultaneously acts as a medium frequency diffusor.
STRECKKOD HP is available in four elegant finishes: 'Nordic', ‘Cerise’, and black or white lacquered.
Technical foundations
When the porous materials, such as the foam, are installed in corners and on walls, they become less efficient in handling the lowest frequencies, because the speed of the particles, associated with the movement of the air, is very low with long wavelengths (bass frequencies). However, in this position the sound pressure is at its maximum. The Streckkod HP internal membrane operates with the wave pressure, vibrating in harmony with a range of frequencies from 90Hz to 105Hz. The membrane converts the fluctuation of the air pressure in motion, which passes through the high-density absorbent core, reducing the energy of the low frequencies.
What is it for?
STRECKKOD HP was designed to control low frequency reverberation and to reduce the effects of stationary waves in music studios, control rooms, mastering rooms, Hi-Fis, radio/television studios, etc.
Streckkod HP bass traps are highly recommended for smaller rooms (< 14m2) with low frequency problems.
What is their format?
- Basstraps measuring: 595mm x 595mm x thickness of 134mm
- Colours: Nordic, Cerise, White or Black
- Boxes of: 2 units. - area coverage = 0.71 m2
- Normal packaging: 63cm x 34cm x 65cm (0,14m3 / 15 Kg.)
Where is it installed?
Streckkod HP bass traps perform best when installed in the corner of the room. The design of its structure allows more units to be added by stacking them, forming columns of up to 3 units (180cm in height).
It is also possible to install them on a wall. In this case, their performance will depend on their position. For this, their position must be adjusted to ensure proper functioning:
- 63Hz : should be situated 2.4m from the closest corner.
- 80Hz : should be situated 1.8m from the closest corner.
- 100Hz : should be situated 1.4m from the closest corner.
- 125Hz : should be situated 1.0m from the closest corner.
| Available Finishes: | |||
|---|---|---|---|
 |
 |
 |
|
Physical properties |
Technical Drawing | |
|---|---|---|
| Description: Resonator bass traps Material: Core of ZHFR acoustic foam Finishing: Varnished or lacquered wooden panel Colours: Nordic, Cerise, White or Black Composite: Flexible open-cell polyurethane Density: 28 Kg/m3 (ISO 845) Porosity: 3.5 L/min (ISO 4638) Resilience: 40 % (ISO 8307) Fire Rating:
|
 |
Sound absorption
Absorption coefficients in octave bands (ISO 354):
| 63 Hz | 125 Hz | 250 Hz | 500 Hz | 1 kHz | 2 kHz |
|---|---|---|---|---|---|
* absorption coefficients in third octave are available in the data sheet.
SKBT007-W01
1000 Items
Specific References
9 other products in the same category:
HAVSVÅG BT
€59.00
Bass traps with an exclusive design, 300 x 300 x 600mm tiles. Boxes of 2, 4 or 8 units, to cover up to 4 corners. ZHFR acoustic foam, charcoal grey or garnet, self-extinguishing, E-d0 (EN 13501-1).
STRECKKOD BT
€164.00
Bass traps with wooden finishingz, 595 x 595 mm (thickness of 139mm). Boxes of 2 units to cover up to 0.71m2. Made by foam core and wooden panel. Optimal acoustic performance for control and mastering rooms.
KOTKA
€69.00
A versatile sound absorbing panel with three mounting positions. 100 x 60cm panels (thickness of 70mm). Pack with 2 units to cover up to 1.20m2 or 2 corners. ZHFR acoustic foam in charcoal grey, self-extinguishing, E-d0 (EN 13501-1).
JJM-130
€102.00
BASS TRAP acoustic panel with a thickness of 130 mm, in 2 sizes: 120x60 and 60x60. Wood structure and sound absorbent core made from PET synthetic fibre and acoustic fabric. Standard acoustic fabric range with 8 colours plus 23 optional colours.
KINO BT
€129.00
Versatile bass traps (angular or flat), 600 x 600mm tiles (thickness of 120mm). Boxes of 4 units to cover up to 1.44m2. ZHFR acoustic foam, charcoal grey, self-extinguishing, E-d0 (EN 13501-1).
KINO BT SOFT
€276.00
Bass traps for home cinema, 600 x 600mm tiles (thickness of 120mm). Boxes of 4 units to cover up to 1.44m2. Textile finishing in matt black, without reflections, self-extinguishing, E-d0 (EN 13501-1).
Resonator bass traps measuring 595 x 595mm (134mm thickness). Boxes containing 2 units, manufactured with a wood structure, an absorbent core and resonating membrane. High acoustic performance for control and mastering rooms.