BASS TRAP acoustic panel with a thickness of 130 mm, in 2 sizes: 120x60 and 60x60. Wood structure and sound absorbent core made from PET synthetic fibre and acoustic fabric. Standard acoustic fabric range with 8 colours plus 23 optional colours.
FREE SHIPPING FOR SPAIN
On orders from € 600 for the Peninsula and the Balearic Islands. For rest of Europe please contact
PERMANENT STOCK
More than 1000 m2 for products storage. Custom manufacture available.
SECURE PAYMENT
Pay with Mastercard / Visa. BBK
The JJM 130 is a versatile acoustic panel / bass trap that can be used for full frequency soundproofing or as a broadband bass trap, based on a sound speed absorbent with a thickness of 130 mm, built professionally to give an excellent, broad spectrum sound absorption performance, which means it can operate in the entire frequency range.
|
The JJM 130 acoustic panels are made from a rigid wood structure that incorporates a set of eyebolts to enable it to be easily hung from the wall or ceiling. As easy to install as hanging a picture. They are supplied in two basic formats; 120 x 60 cm and 60 x 60 cm, for adaptation to most areas and they can be made to size, depending on the specific characteristics of each area. |
 |
The JJM 130 panels are available in the ‘broadband’ version, for sound absorption throughout the entire spectrum, or in the ‘membrane’ version, with a flexible membrane that limits sound absorption from 400hz and also extends and emphasises absorption at low frequencies, converting the panel into an excellent broadband bass trap.
Our JJM 130 acoustic panel is the most versatile option for correcting reverberation and controlling primary / secondary sound reflections, dramatically improving clarity in rooms where precise sound control is required by means of a professional, high quality product with a pleasing appearance.
These panels are widely used for soundproofing in control rooms, test rooms, high-end environments and cinema theatres.
The JJM acoustic panels are usually shipped within 5-7 working days for standard fabrics. However, when our plant is busy, orders may take up to 10-15 days to process. Please don´t wait until the last minute to place your order!
The JJM panels are usually installed vertically, horizontally or hung.
See the ‘INSTALLATION tab for more details of each option.
| Standard fabrics: | |||
|---|---|---|---|
 |
 |
 |
|
| Havana | Blizzard | Slip | |
 |
 |
 |
|
| Optional fabrics (surcharge per panel: + 8€) : | |||||
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
| Solano | Lobster | Belize | Tortuga | Bridgetown | |
 |
 |
 |
 |
 |
|
| Tequila | Sandstorm | Oyster | Rum | Buru | |
 |
 |
 |
 |
 |
|
| Martinique | Marianna | Bluebell | Scuba | Steel | |
 |
 |
 |
 |
 |
|
Our engineers are at your disposal to offer you advice and tips about the most appropriate acoustic design for your particular case. Please don’t hesitate to ask us!
Physical properties |
Technical Drawing | |
|---|---|---|
| Description: Acoustic panel with fabric Material: Wood structure, sound-absorbent core made from synthetic fibre Finishing: Acoustic fabric 100% recycled polyester Colours: 31 fabrics to choose, 8 standar + 23 optional Certificates: OEKO-TEX Standard 100 Fire rating:
|
 |
Absorption coefficients in octave bands (ISO 354):
| 125 Hz | 250 Hz | 500 Hz | 1 kHz | 2 kHz |
|---|---|---|---|---|
* absorption coefficients in third octave are available in the data sheet.
Global coefficients:
| NRC |
|---|
| SAA |
| α mid |
| α w |
Installation
The JJM panels can be easily and quickly installed by either hanging them on the wall or the ceiling like a picture using our assembly kits.
Wall mount – vertical position
Use the plugs and hooks supplied with the panel to install them like a picture. Fasten the hooks to the wall leaving a space of 50 cm between each.
Wall mount – horizontal position
For this type of assembly, the standard eyebolts of the panel structure have been replaced with perforations that enable the panels to be hung from the hooks. This way, the hooks are fastened to the wall leaving a space of 58.5 cm between each.
Ceiling mount – hanging kit (+ 10,75€)
The ceiling mount kit includes adjustable systems to hang the panels from the ceiling with a margin of 5 cm – 10 cm from the ceiling. In addition, the system allows the height to be adjusted individually in each fastening, with the option of installing the panel with the desired inclination, depending on the case.
For this installation system, fasten the 4 eyebolts included in the kit to the ceiling, creating a grid with a separation of 50 cm and 58.5 cm, respectively.
Bass traps with wooden finishingz, 595 x 595 mm (thickness of 139mm). Boxes of 2 units to cover up to 0.71m2. Made by foam core and wooden panel. Optimal acoustic performance for control and mastering rooms.
A versatile sound absorbing panel with three mounting positions. 100 x 60cm panels (thickness of 70mm). Pack with 2 units to cover up to 1.20m2 or 2 corners. ZHFR acoustic foam in charcoal grey, self-extinguishing, E-d0 (EN 13501-1).
Versatile bass traps (angular or flat), 600 x 600mm tiles (thickness of 120mm). Boxes of 4 units to cover up to 1.44m2. ZHFR acoustic foam, charcoal grey, self-extinguishing, E-d0 (EN 13501-1).
Bass traps for home cinema, 600 x 600mm tiles (thickness of 120mm). Boxes of 4 units to cover up to 1.44m2. Textile finishing in matt black, without reflections, self-extinguishing, E-d0 (EN 13501-1).
Resonator bass traps measuring 595 x 595mm (134mm thickness). Boxes containing 2 units, manufactured with a wood structure, an absorbent core and resonating membrane. High acoustic performance for control and mastering rooms.
Bass traps with an exclusive design, 300 x 300 x 600mm tiles. Boxes of 2, 4 or 8 units, to cover up to 4 corners. ZHFR acoustic foam, charcoal grey or garnet, self-extinguishing, E-d0 (EN 13501-1).
BASS TRAP acoustic panel with a thickness of 130 mm, in 2 sizes: 120x60 and 60x60. Wood structure and sound absorbent core made from PET synthetic fibre and acoustic fabric. Standard acoustic fabric range with 8 colours plus 23 optional colours.
